Thank you for visiting, we offer a variety of products and service to fit your needs!
We have you covered from seat to helmet!
KRJ is your Midwest Head Quarters for SFI 38.1 Hans Recerts.
The RaceQuip PRO Youth is an SFI 24.1 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The SFI 24.1 rating means that the Nomex® interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO Youth Helmet is suitable for use in all forms of Youth motorsports from Quarter Midget (QMA) to NHRA and IHRA Jr. Dragster racing. The comfort fit Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO Youth full face helmet. Available in Gloss White, Gloss Black, Gloss Steel, Flat Black, and Hot Pink. Fits sizes 51 - 53cm / 20" - 20 7/8" from $199.99 ea.
Note: if you need a Snell SA rated helmet in a Youth size, see our PRO15 Model as they are now available in XXS and XS sizes
The RaceQuip VESTA20 CARBON Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. The VESTA20 design is a bold departure from traditional auto racing helmet styling and now it’s lighter than ever. A uniquely shaped chin bar supports a scalloped faceshield design. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber. The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip VESTA20 CARBON Helmet is suitable for use in all forms of motorsports. The rear exhaust vents and comfort fit blended Nomex® interior help to keep your scalp cool. Additionally, an extra set of thicker cheek pads are included to allow a customized fit. All these features are wrapped in a bold design lightweight Carbon composite shell and the result is the outstanding value delivered by the RaceQuip VESTA20 CARBON Helmet. Available in sizes Small – 2XL.
The RaceQuip PRO20 CARBON TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield though molded vents above the eyebrows. The forced air cools your face and airways and also keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber. The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 CARBON TOP AIR Helmet is suitable for use in all forms of motorsports.
The RaceQuip PRO20 CARBON Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with advanced composite production techniques. The shell is built using pre-preg Carbon Fiber and Kevlar(R) materials placed into pressurized steel molds to achieve the best combination of light weight and strength. Reinforced M6 threaded HANS/HNR inserts are mated to the Carbon Fiber shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The fire retardant clear coat produces a deep gloss finish to highlight the tight weave of the Carbon Fiber.The Snell SA rating means that the interior, clear coat, and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 CARBON Helmet is suitable for use in all forms of motorsports. The rear exhaust vents and comfort fit blended Nomex® interior help to keep your scalp cool. All these features are wrapped in a stylish aero design lightweight Carbon composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 CARBON Helmet. Available in sizes Small – 2XL.
The RaceQuip OF20 is a Snell SA2020 rated open face auto racing helmet that incorporates classic styling with hand crafted production techniques. The FRP composite shell is hand laid to achieve a balance between light weight and strength. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. A wide eyeport provides good peripheral vision and allows the use of personal eyewear or goggles. The SA rating means that the Nomex® interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip OF20 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top of the shell help keep your scalp cool. All these features are wrapped in a hand laid FRP composite shell and the result is the outstanding value delivered by the RaceQuip OF20 Open Face helmet. If you drive a closed cockpit racecar and like the feel of an open face helmet, this is the model for you. Available in Gloss White or Gloss Black in sizes Small - 2XL
The RaceQuip PRO20 TOP AIR Helmet is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The shell is built using pre-preg composite materials placed into pressurized steel molds to achieve the best combination of light weight and strength. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose. The unique manifold design gives this helmet a super low profile that will fit in any car and utilizes an inlet barb that works with standard 1.250" round hose. The forced air is channeled from the manifold all the way to the forehead area where it blows downward across the faceshield. The forced air keeps you cool and keeps the faceshield fog free. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The SA rating means that the interior, paint and kevlar chin strap are all fire retardant, so the RaceQuip PRO20 Top Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior helps keep your scalp cool. All these features are wrapped in a stylish aero design FRP composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 Top Air helmet.
The RaceQuip PRO20 is a Snell SA2020 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The shell is built using pre-preg composite materials placed into pressurized steel molds to achieve the best combination of light weight and strength. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. Cheek pads are held in by hook and loop so they can be removed for cleaning and adjusting. The distortion free 3mm polycarbonate faceshield features a red anodized aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. The Snell SA rating means that the interior, paint, and kevlar chin strap are all fire retardant so the RaceQuip PRO20 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a stylish aero design FRP composite shell with a medium sized chin spoiler. The result is the outstanding value delivered by the RaceQuip PRO20 full face helmet. Available in Gloss White, Gloss Black, Gloss Steel, Hot Pink, Corsa Red, Flat Black, and America Graphic in sizes XX-Small - 3XL
KRJRaceProducts